2006 BMW 330i
Mileage
131,777
Service Date
12/9/2021
Services Performed
- Codes stored o/a: 2F4F Vehicle speed, plausibility 2DEC power management, battery monitor 51AD Wheel speed from dynamic stability control DSC missing CF2B No message from longitudinal dynamics management, reciever transmission control, transmitter gear selector switch 5DF4 Wiring supply voltage <9v 5E43 Steering angle sensor internal 94C2 SZL steering column switch unit, steering angle sensor, sensor failure – zero point data faulty 94C7 Steering column switch unit, stering and sensor, sensor failure, Zero point data CRC error 5DC6 Wheel direction rear right 93D0 Supply voltage under voltage 93FB No message from dynamic stability control, crash saftey receiver/MRS5, dynamic stability control transmitter 9C6C 12v output preipherv A110 Road speed signal implausible A0B2 Terminal 30E 30i supply 9CB3 Front ride height sensor faulty 9CCE battery exhausted E18D RAD-2GW wake up network unsuccesful A5Ca Switch ORI relay for windcreen wiper D026 Message error ,reciever, longitudinal dynamics monitor LDM, transmitter dynamic stability control D007 Longitudinal dynamics managment Can comm. fault 62D6 LDM – DSC – Interface D023 Message fault – wheel circumfential velocity – LDM DSC A08C Comfort access – outside door handle, drivers door, antennas faulty A06B Comfrot access – Antenna, bumper SZL module is faulty – will need new module and associated programming. Steering angle faults in ABS module. Monitored steering angle sensor data and showed no movement when wheel is turned. Recommend new SZL module, reprogram and test again to see what other faults remain.
- Attempted to program but ran into errors each time. Used several tools and could not get DSC module to code/program correctly. DSC/ABS module is in need of replacement.
- Removed steering wheel and installed new steering angle sensor.
Joseph W. gave our service a 5 star review on 12/9/2021
