2010 Nissan Frontier
Mileage
180,629
Service Date
8/27/2021
Services Performed
- Engine runs OK o/a, several lights on dash. CEL, TPMS, BRAKE lights o/a. Scanned and found several faults: P0448 Vent Control Valve P0340 Camshaft position sensor problem, B1 C1130 Engine 1 fuel cut system fauld Monitored engine data while engine running, when engine stumbles and dies, bank 1 cam position sensor shows erratic data. When reading is irregular engine struggles to start. Crank position sensor (rpm) seems steady and consistant. Per nissan, when an issue with one of the cam position sensors arrises, they recommend replacing both cam sensors and the crank position sensor as all are common failure items. Recommend starting with sensors due to age and erratic readings. If bank 1 readings do not improce, further investigation into cam adjusters and solenoid will be required.
- Replaced suspected bad cam sensor and test drove. Data from sensor was within 2-3 deg of other cam sensor and zero deviation. No stumbling or dying during an hour of run time + test driving. After confirming sensor was fix, replaced other cam sensor.
- Replaced crankshaft position sensor
Bob C. gave our service a 5 star review on 8/28/2021
