2007 Audi RS 4
Mileage
140,441
Service Date
7/26/2024
Services Performed
- Scanned vehicle, faults stored: ECM-01: P0568 – cruise control set signal P0162 – power supply terminal 30, voltage too low ECM-11: P2020 – intake manifold runner position sensor/switch circuit, B2, range/performance P2019 – intake manifold runner position sensor/switch circuit, B2 P1602 – power supply terminal 3, voltage too low SRS-15: 01212 – rear belt tensioner igniter, front passenger side LWR-55: 02233 – left headlight power output stage 02234 – right headlight power output stage ZKS-46: 00957 – key 3 Inspected intake runner valve sensor and linkage – found B2 sensor was not plugged in and harness was tucked behind B2 upper timing cover. Reconnected sensor and cleared faults – fault returned after 2 key cycles. Noticed vacuum line was rubbing against radiator fan blades. Will need to remove intake manifold for runner valve inspection. **LF inner cv boot cracking, LF inner tie rod has slop, front control arms worn/bushings very cracked, both valve covers leaking oil
Jason Y. gave our service a 5 star review on 7/26/2024
